Certified ISO 9001:2008
 

 
 Industrial Fittings, Clamps & Accessories
  These fittings are used for a variety of applications that are distinct from hydraulic applications.
 
Subcategory Image Description
Brass Fittings    Fittings include barbed inserts, garden hose threaded fittings, inserts, and push on/push loks fittings. 
Brass Pipe Fittings    Pipe fittings are used to connect various pieces of hose lines. Pipe fittings include adapters, jump-sizes, caps and plugs, and connectors/menders.  
Bushings-NPT    Bushings are used to connect and mend lines together. Bushings use National Pipe Thread (NPT). There are Close Nipples, Straight Bushings, and jump-sizes.  
Cam and Groove Fittings    Camlocks are used to quickly connect and disconnect fittings on hose. They come in a variety of materials including aluminum, stainless steel, brass, malleable iron, and polypropylene. Sizes and styles vary.  
Clamps    Clamps vary by styles and applicable purposes. Clamps secure hose stems to a hose. A general rule when determining the number of clamps needed is 1 clamp per inch of hose (i.e. 3" hose should have 3 clamps on each end.) We offer styles including worm gear, t-bolt, double bolt, pre-formed, band & strapping.  
Foot Valves and Strainers    Foot valves and strainers are meant for use on the suction-side of pumps. Foot valves are used to maintain pump prime between pumping cycles. Strainers prevent debris from entering piping systems. These products can be used with jet pumps and centrifugal pumps for suction from ponds, wells, and other areas with standing water. 
Ground Joint Seal Couplings    These couplings must be grounded on each end. Used for hydraulic, chemical, and other applications.  
Hose Reels    Hose reels can make the use and storage of hoses functional, easy, and efficient. Styles vary from manual, spring-powered, automatic, portable, or storage for the off-season.  
Nozzles    Nozzles are used for special fuel applications. Come general uses are bulk oil delivery, truck, bus, or fleet fueling services, and more. Styles vary. 
Nozzles and Hydrant Adapters    Nozzles and Hydrant Adapters may be used by fire departments or others for high-powered water applications. 
Pressure Gauges    There are two types of gauges: Liquid Filled and Dry. Liquid Filled gauges can be used to help prevent two common reasons for gauge failure: pipe vibration and water condensation (in colder climates water can freeze and damage the gauge housing.) Liquid fillable utility gauges are designed for a wide range of applications on pumps, compressors, hydraulic systems, machine tools and petrochemical processing equipment.  
Sandblast Couplings    Sandblast Couplings are designed for use on sandblast hose. Couplings are supplied with screws.  
Shank Type Fittings    Includes Menders, Vitraulic, Flanged, NPT, NPSM, and GHT styles. Shank Type fittings have a hose stem on at least one end to insert into a hose. These fittings are used for connecting two parts of a line. 
Standard Brass Compression Fittings    Compression fittings are used to join two tubes or thin-walled pipes together. Compression fittings are the industry standard for chemical, oil and gas, R&D, Bio-tech, and the Semiconductor industry. They are used for their ability to provide leak tight seals. 
Universal Couplings (Chicago)    Chicago fittings are one-quarter turn fittings used for attaching hoses or piping together. Chicago fittings are used on both high pressure gas and fluid lines. Chicago fittings seal by seating together each fitting's gasket.  
Valves    Valves regulate the flow of a fluid by opening, closing, or partially obstructing various passageways. Valves are technically pipe fittings, but are usually discussed as a separate category. 
 
 







 
Summers Rubber Co. Corporate Office - 12555 Berea Road, Cleveland, Ohio 44111   Phone: 1-800-686-5801   Fax: 216-941-4673