|
Metric Standpipe Assembly
A metric standpipe assembly is comprised of three
components attached to a male fitting. The components
are: a Standpipe, Bite Sleeve and Metric Nut. The nut is
placed over the Standpipe, followed by the Bite Sleeve
(see illustration below). For DIN light assemblies, a DIN light
metric nut is used. For DIN heavy assemblies, a DIN heavy
metric nut is used. The Bite Sleeve and Standpipe are
selected on the basis of tube O.D. required.
Metric Standpipe Assembly
| Metric Standpipe DIN Tube O.D. (mm) |
Bite Sleeve DIN Tube O.D.(mm) |
Metric Nut Thread |
| Light |
Heavy |
| 6 |
6 |
M12x1.5 |
- |
| 8 |
8 |
M14x1.5 |
M16x1.5 |
| 10 |
10 |
M16x1.5 |
M18x1.5 |
| 12 |
12 |
M18x1.5 |
M20x1.5 |
| 15 |
15 |
M22x1.5 |
- |
| 16 |
16 |
- |
M24x1.5 |
| 18 |
18 |
M26x1.5 |
- |
| 20 |
20 |
- |
M30x2 |
| 22 |
22 |
M30x2 |
- |
| 25 |
25 |
- |
M36x2 |
| 28 |
28 |
M36x2 |
- |
| 30 |
30 |
- |
M42x2 |
| 35 |
35 |
M45x2 |
- |
| 38 |
38 |
- |
M52x2 |
| 42 |
42 |
M52x2 |
- |
|
|
